Product Category: New Battery Tools

GripPack 1 1/4″ Sealer

Along with the GripPack tensioner the GripPack sealer is the only battery operated steel strap sealer in the world. The GripPack offers ergonomic one button sealing for use with both regular duty and high tensile steel strapping.

  • One Button Operation
  • Green LED Indicates Tool is Ready to Strap
  • LED Light Illuminates Seal Area
  • 18 Volt Li-Ion Battery for Long Lasting Operation

 

  • Operation Mode: Battery Automatic
  • Sealing: Single Reverse Notch
  • Strap Type: High Tensile Steel Strapping
  • Strap Width: 1 1/4″
  • Strap Thickness: .025″ – .031″
  • Weight: 7.5 lbs
  • Battery Type: Bosch Li-Ion 18V, 4.0 Ah
Signode GripPack 114 Tensioner

PB-114 GripPack 114 Tensioner

Signode’s PB-114 GripPack 114 Tensioner

Signode’s new GripPack 114 tensioner tool is battery powered and replaces the pneumatic PN2-114. The Signode GripPack tensioner runs off of an 18 volt Bosch battery. The battery tensioner is a pusher style, and uses its duck bill nose to push seals and pull tension. This PB-114 GripPack tool pairs with the Grip Pack 114 Sealer. The GripPack tensioner runs 3/4″ steel strap up to 1 1/4″ steel strap with no adjustment.

Versatility:

There are no tools more convenient than the battery powered tools. This GripPack Tensioner totally eliminates the cost of air lines but supplies similar tension as its pneumatic competitors. Not only do battery tools save cost, they offer the greatest mobility of any other tools. Even when compared to manual tools, the weight of battery tools is much less so they can be easily transported around the loading dock and work room. Many people are shocked to hear the new Signode GripPack 114 Tensioner can pull 1,500 pounds of tension. The Lithium-Ion batteries allow the maximum amount of tension to be pulled with just one squeeze of the handle. One charge of the battery can complete up to 120 strapping cycles. *The GripPack battery and charger are sold separately.

Specifications:

Strapping: Magnus/High Tensile or Apex Plus Steel strapping
Strapping size: ¾” -1-1/4”x 0.025” to 0.031 (19mm – 33mm x 0.64mm- 0.80mm)
Tension: adjustable from 800 lbs to 1500 lbs (3600 N to 6670N)
Part Numbers: 800441 (tensioner only), 800466 (GripPack Kit 110V -standard), 800467 (GripPack Kit 220 volt, contact Allstrap by phone or email for this version)
Weight: 3.8 kgs (8.5 lbs)

 

BPT-L19 Battery Powered Push Style

The BPT-L19 is available in three sizes:

  • BPT-L13: 1/2″ (12.7mm) x 0.015-0.024″ Seal .5 Inch Push Seal
  • BPT-L16: 5/8″ (15.9mm) x 0.015-0.024″ Seal .625 Inch Push Seal
  • BPT-L194: 3/4″ (19.0mm) x 0.015-0.024″ Seal .75 Inch Push Seal

For use with 1/2″-3/4″ (16 mm-19 mm) x .015″-.024″ Apex Plus or Magnus strapping

  • Tension: 674 pounds
  • Joint type: Single reverse notch
  • Weight: 10 lbs. (4.5 kg)

The Signode BPT-L19 is a single reverse notch sealer used with regular duty or high tensile steel strapping, and recommended for use on round or irregular loads. Weighing 10 pounds (half a pound more than the pneumatic PNSC2), the BPT-L19 tool uses its duck bill nose to push the seal, a feedwheel to pull tension, and jaws to notch the seal in a full combination action. The BPT-L19 applies up to 674 lbs. tension to steel strapping. The BPT-L19 is a relatively easy tool to operate thanks to the two bottom control system. The strap easily slides out after each strapping cycle. The touch screen allows you to change the tension settings, or to switch between manual and automatic.

BPT-H32 Battery Operated Steel Strapping

  • Strap Type: High Tensile/Magnus
  • Strap Width: 1 1/4 Inches
  • Strap Thickness: 0.023″- 0.031″
  • Seal Name: 1.25 Inch Push Seal
  • Joint Type: Double Notch
  • Weight: 18.3 pounds

 

The Signode BPT-H32 Battery Operated Steel Strapping Combination tool has been designed to overcome multiple challenges when using steel strapping to package your goods. The H32 has a double notch sealer used with either a regular or high tensile strap. It has been recommended for round and irregular bundle shapes. The BPT-H32 has the power to replace a pneumatic tool and get more consistent strap cycles making your bundles more secure.