Products

Categories
Sub-Categories
  • Made in the USA
  • Tool Type: High Tensile Side Action DN Premium Sealer
  • Strap Size: 3/4”
  • Tensile: .025 – .031
  • light weight aluminum head
  • Tool Weight: 5.5 lbs.
  • Box Dimensions: 11”W x 30”L x 4”H
Designed with high quality, Complete Packaging Products, 3/4” High Tensile Side Action DN Premium Sealer is the best tool on the market. Double Notch, Up-Cut. Used with all strapping seals. Works with most gauges of high tensile pallet strap.

Side action, double up notch.

This tool uses 1032, 1032PBH, and 1037 seals, and 1-1/4” X .025-.035 steel strapping.

  • Made in the USA
  • Tool Type: Signode DN Premium Sealer
  • Strap Size: 1 1/4”
  • Tensile: .025 – .035
  • Tool Weight: 8 lbs.
The PHDS 2 1/4” pneumatic sealer is the perfect companion for the PHDX-114 tensioner.  A very reliable tool originally produced by Acme/Rapz, this tool has stood the test of time.  
The Rapz PHDX 114 is a pneumatic pusher tensioner for steel strapping to secure round or irregular shaped packages. The PHDX-114 is light enough it does not have to be counter balanced. This tool is very mobile and is standard in steel service facilities.  
The Signode PH-2 is a rack and pinion style pusher tensioner for steel strapping. An advantage of the PH-2 is that it pulls more tension than the feed wheel style tensioners. This tool has limited uptake, as much as the rack is long. The PH-2 is used with .75\” and 1.25\” x up to .031\” banding and weighs 7 lb.
Characteristics Strapping qualities: Polyester (PET) plain and embossed Strapping dimensions: Widths = 19.0 – 32.0 mm / 3/4 – 1 1/4“ Thicknesses = 0.60 – 1.53 mm / .024 – .060“ Weight incl. battery: 5.7 kg / 14.1 lbs. (including battery) Tool sizes with battery: L396 x W166 x H175 mm / 15.6“ x 6.5“ x 6.9“ Average seal strength: up to 75% (dependent on strap quality) Strap tension: 1200 – 7000 N / 270 – 1575 lbs (adjustable) Tensioning speed: 39 – 63 mm/s / 1.5 – 2.5 inch/s Power supply: 36VDC/4.0Ah Li-Ion

Advantages Exceptionally high tension force 7,000N / 1,575 lbs. Brushless motor for less maintenance Tool in automatic version available for more efficient operation Well balanced for all strapping positions Quick battery exchange Latest Li-Ion battery technology with up to 370 strap cycles per charge Tool welds without tension (strap repair) Tension force and sealing time adjustable

Lithium-Ion Battery: No memory effect Maximum possible power with low weight Environmental friendly Operates well in low and high temperature environment High performance till end of charge Battery cell management and protection included

Signode BXT3 (also known as the BXT3-16) Battery Powered Strapping Tool

The BXT3-16 strapping tool keeps up many of the features loved on the BXT2-16.  The new BXT3 has updated the display.  Now there is a beautiful screen that shows exactly what the tool is doing, and can do.  It is easier to adjust tension, and weld, and flip from manual mode to automatic. The display shows tension in real time.  The display ticks up as the tool is pulling the banding tight.  In auto mode, the tool kicks into weld/cut once tension is reached. The battery and charger remain Bosch, but now the battery is a slim pack.  It uses the same charger.  The feel and balance is similar to the original tool, which is best in class. Tension is 90-560 pounds!  The Signode BXT3-16 has optional charger and 2.0 Amp Hour 18 volt lithium battery.  Run it on either 1/2“ or 5/8” x .019-.040” polyester or polypro strapping.  The BXT3 is only 8.4 pounds. For 3/8” use the BXT3-13 For 5/8” or 3/4” use the BXT3-19 or P329 For 1” or 1 1/4” use the P331   This Signode BXT3-16 tool is of the easiest to use on the market.  The weakest two parts on the BXT2 were upgraded.  The blocking pawls (responsible for swinging the arm away from the feedwheel) was replaced by a spring.  The second trouble spot for the BXT2 was things getting caught in the welding belt.  The BXT3 now has a cover to keep big things out, and a blow out hole to get rid of the small things.  The BXT3-16 is also much easier to work on for maintenance.  With these improvements, the Signode BXT3-16 is now tied as our top recommended tool (P328 is the other top tool)! BXT3-16 review update 4-2020:  This Signode tool now relies on a Bosch battery that you can no longer get at Home Depot or Amazon.  The BXT3-16 has a protective cover that hugs the battery.  The cover was nice to make the battery hard to bang up, but now you can not use the current 6, 6.3, or 8 amp batteries, making the BXT3-16 battery expensive and outdated.
The Signode CU-25 is used for up 2” x .050” steel banding. The cutter is reversible guillotine style. The handles on the CU25 are about 2 feet. The Signode CU-25 strap cutters are ergonomic, quick and easy to use cutters for Apex® and Magnus® steel strapping with the dimension of max. 50 x 1.65mm. The long handles enable sufficient force to be applied to cut even the heaviest gauge strapping. The CU-25 is also available with pneumatic pusher (CU-25 MPH) to simplify the strap insertion under tensioned straps or with a pneumatic cutter unit (CU-25 pneum.) for an effortless usage. Cutting straps incorrectly can cause injury so please take the required precautions.
Steel Strapping Tools are ideal for strapping heavy cartons and pallets quickly and safely.

The C405 is a medium duty strapping cutter for up to 1 1/4”(32mm) width strapping up to .035 (.89mm) gauge.

• Strap Type – HT • Strap Size (in.) – 1 1/4”-.031 • Application – steel
Signode DF-15 Dispenser For Steel or Poly 3/8 The Signode DF-15 Dispenser with hub extension can be used with either steel or poly/polyester strapping, in strap sizes 3/8" to 3/4". This strapping dispenser feeds from the outside and is portable for easy mobility.
  • Strap Size: 3/8"-3/4"
  • Coil Size: 16" x 6" Mill
  • Feeds From Outside
  • Portable: Yes
  • Type: PP/PET and Steel
  • DIM Height: 19.33
  • DIM Length: 113.67
  • DIM Weight: 25.33
  • DIM Width: 38.33
Signode DF-X dispenser for plastic or steel strapping is a innovative strapping dispenser that's unique design prevents payout misfeeds. The DF-X has an adjustable cam clamp that enables coils with damaged cores to be used. The large tool tray is able to accommodate a wide range of battery-operated and pneumatic tools.
  • Strap Size: 7/16"-1 1/4"
  • Feeds From Inside
  • Portable: Yes
  • Type: PP/PET and Steel
The DF-10RW Dispenser suits steel strapping 3/4"- 1 1/4" ribbon wound with a core diameter of either 8" or 16."
  • For steel strapping.
  • Mill or ribbon coil winding.
  • Easily loaded.
  • Accepts mill wound or ribbon wound coils 3/4" and 1-1/4" in width.
 
  • Strap Type: High Tensile/Magnus
  • Strap Width: 1 1/4 Inches
  • Strap Thickness: 0.023"- 0.031"
  • Seal Name: 1.25 Inch Push Seal
  • Joint Type: Double Notch
  • Weight: 18.3 pounds
  The Signode BPT-H32 Battery Operated Steel Strapping Combination tool has been designed to overcome multiple challenges when using steel strapping to package your goods. The H32 has a double notch sealer used with either a regular or high tensile strap. It has been recommended for round and irregular bundle shapes. The BPT-H32 has the power to replace a pneumatic tool and get more consistent strap cycles making your bundles more secure.
The BPT-L19 is available in three sizes:
  • BPT-L13: 1/2" (12.7mm) x 0.015-0.024" Seal .5 Inch Push Seal
  • BPT-L16: 5/8" (15.9mm) x 0.015-0.024" Seal .625 Inch Push Seal
  • BPT-L194: 3/4" (19.0mm) x 0.015-0.024" Seal .75 Inch Push Seal
For use with 1/2"-3/4" (16 mm-19 mm) x .015"-.024" Apex Plus or Magnus strapping
  • Tension: 674 pounds
  • Joint type: Single reverse notch
  • Weight: 10 lbs. (4.5 kg)
The Signode BPT-L19 is a single reverse notch sealer used with regular duty or high tensile steel strapping, and recommended for use on round or irregular loads. Weighing 10 pounds (half a pound more than the pneumatic PNSC2), the BPT-L19 tool uses its duck bill nose to push the seal, a feedwheel to pull tension, and jaws to notch the seal in a full combination action. The BPT-L19 applies up to 674 lbs. tension to steel strapping. The BPT-L19 is a relatively easy tool to operate thanks to the two bottom control system. The strap easily slides out after each strapping cycle. The touch screen allows you to change the tension settings, or to switch between manual and automatic.

Signode's PB-114 GripPack 114 Tensioner

Signode's new GripPack 114 tensioner tool is battery powered and replaces the pneumatic PN2-114. The Signode GripPack tensioner runs off of an 18 volt Bosch battery. The battery tensioner is a pusher style, and uses its duck bill nose to push seals and pull tension. This PB-114 GripPack tool pairs with the Grip Pack 114 Sealer. The GripPack tensioner runs 3/4" steel strap up to 1 1/4" steel strap with no adjustment. Versatility: There are no tools more convenient than the battery powered tools. This GripPack Tensioner totally eliminates the cost of air lines but supplies similar tension as its pneumatic competitors. Not only do battery tools save cost, they offer the greatest mobility of any other tools. Even when compared to manual tools, the weight of battery tools is much less so they can be easily transported around the loading dock and work room. Many people are shocked to hear the new Signode GripPack 114 Tensioner can pull 1,500 pounds of tension. The Lithium-Ion batteries allow the maximum amount of tension to be pulled with just one squeeze of the handle. One charge of the battery can complete up to 120 strapping cycles. *The GripPack battery and charger are sold separately. Specifications: Strapping: Magnus/High Tensile or Apex Plus Steel strapping Strapping size: ¾” -1-1/4”x 0.025” to 0.031 (19mm – 33mm x 0.64mm- 0.80mm) Tension: adjustable from 800 lbs to 1500 lbs (3600 N to 6670N) Part Numbers: 800441 (tensioner only), 800466 (GripPack Kit 110V -standard), 800467 (GripPack Kit 220 volt, contact Allstrap by phone or email for this version) Weight: 3.8 kgs (8.5 lbs)  
Along with the GripPack tensioner the GripPack sealer is the only battery operated steel strap sealer in the world. The GripPack offers ergonomic one button sealing for use with both regular duty and high tensile steel strapping.
  • One Button Operation
  • Green LED Indicates Tool is Ready to Strap
  • LED Light Illuminates Seal Area
  • 18 Volt Li-Ion Battery for Long Lasting Operation
 
  • Operation Mode: Battery Automatic
  • Sealing: Single Reverse Notch
  • Strap Type: High Tensile Steel Strapping
  • Strap Width: 1 1/4″
  • Strap Thickness: .025″ – .031″
  • Weight: 7.5 lbs
  • Battery Type: Bosch Li-Ion 18V, 4.0 Ah
Made in the USA Tool Type: High Tensile Side Action DN Premium Sealer Strap Size: 3/4” Tensile: .025 – .031 light weight aluminum head Tool Weight: 5.5 lbs. Box Dimensions: 11”W x 30”L x 4”H Designed with high quality, Complete Read More
Side action, double up notch. This tool uses 1032, 1032PBH, and 1037 seals, and 1-1/4” X .025-.035 steel strapping. Made in the USA Tool Type: Signode DN Premium Sealer Strap Size: 1 1/4” Tensile: .025 – .035 Tool Weight: 8 lbs.
The PHDS 2 1/4” pneumatic sealer is the perfect companion for the PHDX-114 tensioner.  A very reliable tool originally produced by Acme/Rapz, this tool has stood the test of time.  
The Rapz PHDX 114 is a pneumatic pusher tensioner for steel strapping to secure round or irregular shaped packages. The PHDX-114 is light enough it does not have to be counter balanced. This tool is very mobile and is standard in steel serv Read More
The Signode PH-2 is a rack and pinion style pusher tensioner for steel strapping. An advantage of the PH-2 is that it pulls more tension than the feed wheel style tensioners. This tool has limited uptake, as much as the rack is long. The PH Read More
Characteristics Strapping qualities: Polyester (PET) plain and embossed Strapping dimensions: Widths = 19.0 – 32.0 mm / 3/4 – 1 1/4“ Thicknesses = 0.60 – 1.53 mm / .024 – .060“ Weight incl. battery: 5.7 kg / 14.1 lbs. (including Read More
Signode BXT3 (also known as the BXT3-16) Battery Powered Strapping Tool The BXT3-16 strapping tool keeps up many of the features loved on the BXT2-16.  The new BXT3 has updated the display.  Now there is a beautiful screen that sh Read More
The Signode CU-25 is used for up 2” x .050” steel banding. The cutter is reversible guillotine style. The handles on the CU25 are about 2 feet. The Signode CU-25 strap cutters are ergonomic, quick and easy to use cutters for Apex® and Read More
Steel Strapping Tools are ideal for strapping heavy cartons and pallets quickly and safely. The C405 is a medium duty strapping cutter for up to 1 1/4”(32mm) width strapping up to .035 (.89mm) gauge. • Strap Type – HT • Strap Size ( Read More
Signode DF-15 Dispenser For Steel or Poly 3/8 The Signode DF-15 Dispenser with hub extension can be used with either steel or poly/polyester strapping, in strap sizes 3/8" to 3/4". This strapping dispenser feeds from the outside a Read More
Signode DF-X dispenser for plastic or steel strapping is a innovative strapping dispenser that's unique design prevents payout misfeeds. The DF-X has an adjustable cam clamp that enables coils with damaged cores to be used. The large t Read More
The DF-10RW Dispenser suits steel strapping 3/4"- 1 1/4" ribbon wound with a core diameter of either 8" or 16." For steel strapping. Mill or ribbon coil winding. Easily loaded. Accepts mill wound or ribbon wound coils 3 Read More
Strap Type: High Tensile/Magnus Strap Width: 1 1/4 Inches Strap Thickness: 0.023"- 0.031" Seal Name: 1.25 Inch Push Seal Joint Type: Double Notch Weight: 18.3 pounds   The Signode BPT-H32 Battery Operated Steel Strapping Co Read More
The BPT-L19 is available in three sizes: BPT-L13: 1/2" (12.7mm) x 0.015-0.024" Seal .5 Inch Push Seal BPT-L16: 5/8" (15.9mm) x 0.015-0.024" Seal .625 Inch Push Seal BPT-L194: 3/4" (19.0mm) x 0.015-0.024" Seal Read More
Signode's PB-114 GripPack 114 Tensioner Signode's new GripPack 114 tensioner tool is battery powered and replaces the pneumatic PN2-114. The Signode GripPack tensioner runs off of an 18 volt Bosch battery. The battery tensioner is Read More
Along with the GripPack tensioner the GripPack sealer is the only battery operated steel strap sealer in the world. The GripPack offers ergonomic one button sealing for use with both regular duty and high tensile steel strapping. One Butto Read More