BPT-L19 Battery Powered Push Style
The BPT-L19 is available in three sizes:
- BPT-L13: 1/2" (12.7mm) x 0.015-0.024" Seal .5 Inch Push Seal
- BPT-L16: 5/8" (15.9mm) x 0.015-0.024" Seal .625 Inch Push Seal
- BPT-L194: 3/4" (19.0mm) x 0.015-0.024" Seal .75 Inch Push Seal
For use with 1/2"-3/4" (16 mm-19 mm) x .015"-.024" Apex Plus or Magnus strapping
- Tension: 674 pounds
- Joint type: Single reverse notch
- Weight: 10 lbs. (4.5 kg)
The Signode BPT-L19 is a single reverse notch sealer used with regular duty or high tensile steel strapping, and recommended for use on round or irregular loads. Weighing 10 pounds (half a pound more than the pneumatic PNSC2), the BPT-L19 tool uses its duck bill nose to push the seal, a feedwheel to pull tension, and jaws to notch the seal in a full combination action. The BPT-L19 applies up to 674 lbs. tension to steel strapping. The BPT-L19 is a relatively easy tool to operate thanks to the two bottom control system. The strap easily slides out after each strapping cycle. The touch screen allows you to change the tension settings, or to switch between manual and automatic.
